Magnetic Rotating Earth Clamp 600A

Magnetic Rotating Earth Clamp 600A

Cut setup time and keep your leads free from twists with the Magnetic Rotating Earth Clamp. A powerful magnet secures instantly to clean, flat ferrous steel, while the rotating connection lets the work lead turn freely during welding. The result is stable grounding, smoother arc starts and fewer interruptions—ideal for production benches, vehicle work and general fabrication.

WHY CHOOSE A MAGNETIC ROTATING EARTH CLAMP
• 360° rotation: reduces cable twist and strain during long or multi-position welds
• Rapid placement: drop, twist and weld—no jaws to tighten, no lugs to drill
• Consistent contact: broad face area encourages steady current flow
• Great for awkward jobs: works on flat or gently curved ferrous surfaces
• Low maintenance: no springs or serrated jaws to burn or clog

KEY FEATURES
• 600A capacity — headroom for demanding fabrication tasks (duty cycle dependent)
• Strong magnetic hold on clean, flat ferrous materials
• Rotating terminal for freer cable movement and better ergonomics
• Tool-free connection—attach or reposition in seconds
• Suitable processes: MIG/MAG, TIG and MMA/Stick

BEST PRACTICE / TIPS
• Place on bare, clean steel—remove heavy rust, paint and scale for best performance
• Keep as close as practical to the weld zone to minimise resistance in the return path
• Not suitable for stainless, aluminium or other non-magnetic materials
• Keep a sensible distance from intense heat; reposition if the area will exceed the magnet’s service temperature

TYPICAL APPLICATIONS
• Fabrication benches and welding jigs
• Vehicle and bodywork repair on ferrous panels
• Maintenance and site welding
• Light to medium structural steelwork

WHAT’S IN THE BOX
• 1 × Parweld 664500 Magnetic Rotating Earth Clamp 600A

FAQS
Q: Will this work on stainless or aluminium?
A: No. The magnet requires a ferrous surface. For stainless/aluminium, use a mechanical earth clamp or tack a temporary tab.

Q: Can I place it over paint or rust?
A: Light coatings reduce contact. Clean to bright metal for the most reliable ground.

Q: How close should the clamp be to the weld?
A: As close as practical. Shorter return paths reduce resistance and improve arc stability.

WHY BUY FROM NORSEMEN SAFETY
• Authorised supplier for leading welding brands
• Trade-counter support from experienced welding specialists
• Fast delivery across NI, ROI and UK

Need advice? Call 028 9046 0541 or email info@norsemensafety.co.uk.