STAHLWERK MIG MAG 200 Double Pulse Mig Pro full-synergic welder with 200 Amp and AK25/MB25 welding torch

Universally applicable 3 in 1 combination unit. MIG, MAG and MMA welding is possible up to 200 amps.
Built-in safety function to reduce the voltage (Volt Reduction Device – VRD). To increase safety during welding, the open circuit voltage U0 is reduced to 14 volts in MMA mode. The welder automatically detects the start of the welding process and then increases the open circuit voltage up to 62 volts. VRD is factory preset and cannot be turned off.
Built-in job memory allows preferences and parameters to be set to complete recurring jobs efficiently and quickly. Jobs and parameters can be restored. This enables convenient work without spending a lot of time on set-up times.
2T/4T (MIG) mode allows control of the operating mode and provides advanced control over current flow in Special 2 and Special 4 cycle modes.
Automatic wire feed for precise regulation of wire feed speed in direct relation to the set welding current.
Extensive setting options in terms of current and functions via intuitive graphic interface in the display.

Output current MIG / MIG pulse / MMA 50 – 200 A (MIG) / 30 – 170 A (MIG pulse) / 20 – 180 A (MMA) Protection class IP21S Mains voltage 1 x 230 V AC (+- 15%) Mains frequency 50/60 Hz Maximum mains current (I1max) 38 A Maximum effective mains current (I1eff) 14,7 A Open circuit voltage (U0) 62 V Weight 17.25 kg Dimensions L x W x H (mm) 590 x 240 x 430 mm Mains connection CEE 7/7 Schuko plug Standards IEC 60974-1; EN 60974-10 (Class A) WEEE reg. no. DE 85577200

[pt-no-reviews]